Transparent Hot Melt Glue Granules OODA-903P

Product Detail

Product name:	Hot Melt Glue Granules
Product no.:	OODA-903P
Appearance:	White Transparent Granules
Softening point:	82? ± 3?
Viscosity(180?):	12500 ± 500 CPS
Components:	EVA resin, tackifying resin, paraffin, additives, etc.
Features:	Prevention of Yellowing. / Good initial adhesion. / Good re-melting. / Moderate open period. / Good Water Resistance. / Good Age Resistance. / Good Oxidation Resistance.
Application:	Prevention of Yellowing EPE (expanded plastic). / Plastics.
Usage:	1.Temperature control: The operating temperature is usually controlled between 160 ?~ 180 ?, but not exceed 220 ?. Check the temperature regularly, and use laboratory thermometer , metal thermometer, electrode thermometer directly and systematically. If necessary, readjust it again. Because of long time working,, the thermometer installed on the machine may give the wrong information. 2.Lining speed: 12~15 m/min, according to the width of the edge, low speed can lead to errors. 3.The consumption of hot melt adhesive for sealing side: 300~400g/m2.
Packing & Storage	Paper bags packing, 25Kg/bag. Stored in a cool and dry place, storage period is two years.
Note:	1.Opening and curing time will vary with the temperature at which the adhesive is heated, coating amount, sticking period and the strength. 2.The temperature of the melting system is high, please do not touch it with your hand in order to avoid scald. 3.If the glue drop on the skin, the burnt part should be immediately immersed in cold water for at least 15 minutes and then sent to hospital to be treated.
Our Factory:	In our group, KunShan factory is focus on hot melt glue stick, granules and pressure sensitive HMA production, and Vietnam factory is focus on HMA film production